Fridge and Freezer Checks You Can Trust
Keep chilled and frozen food in the safe zone with the ThermaGuard 101. A remote probe on a two metre lead sits inside your fridge or freezer while the display stays outside the door, so you can read the temperature without letting the cold out. A second sensor in the case shows the room temperature at the same time. When an inspector or event food safety adviser asks how you check your cold storage, you have a clear answer and the readings to fill in your records.
Key Features
- Remote water-resistant probe on a two metre lead
- Internal sensor for room or ambient temperature
- Accurate to ±0.4 °C with 0.1 °C resolution
- Programmable high and low audible alarm
- Max/min memory for each sensor
- Up to 25,000 hours from two AA batteries
Detailed Overview
The ThermaGuard 101 is a high accuracy fridge freezer thermometer made for daily food safety checks. The large LCD shows one sensor at a time, along with the lowest and highest temperatures since you last reset it. Press MODE to switch between the probe in your appliance and the sensor in the case. The max/min record tells you what happened overnight or while the stand was closed, which is exactly what you need to know before you start service.
Design & Build
The splashproof ABS case is rated IP54 and measures 96 x 73 x 29mm. It comes with a free wall bracket that has a built-in foot stand, a hook for hanging and a tripod thread, so the display can go on a wall, a shelf or the side of a counter. Run the probe lead into the appliance and fix the probe to the inside wall with the small mounting bracket supplied.
Accuracy & CalCheck
Both sensors read to 0.1 °C with ±0.4 °C accuracy. The probe covers -39.9 to 49.9 °C, which takes in fridges, freezers and cold rooms, and the internal sensor covers -19.9 to 49.9 °C. The CalCheck function lets you confirm the electronics are reading correctly at any time. Hold two buttons for three seconds and the display should show 0.0 °C ±0.1 °C. It takes seconds and is a useful check to note in your records.
Alarm & Monitoring
Set your own high and low limits for each sensor. If the temperature moves outside them, the display flashes and an 82.1 dB alarm sounds, so a fridge door left open or a freezer that has stopped working gets noticed quickly. Press any button to silence it and the display keeps flashing until the temperature is back in range. You can mute the alarm altogether if you work in a shared space.
Battery Life
Two AA batteries give up to 25,000 hours of normal use without the alarm sounding, which is around 34 months. A battery symbol warns you at half and low charge, so you can change them before an event rather than during one.
Using it
Mount the display, place the probe and set your alarm limits with the three buttons on the front. Then read and write down the temperature at the start and end of each day. Our A5 Temperature Log Book is made for this and gives you a tidy record to show at an inspection.
Applications
- Catering and display fridges on event stands and food trucks
- Chest and upright freezers
- Walk-in cold rooms and chilled stores
- Commercial kitchens and prep areas
- Room temperature in dry stores
Know your fridge and freezer temperatures at a glance and have the readings for your records. Add the ThermaGuard 101 to your basket today.
Product Details
| Range (probe): | -39.9 to 49.9 °C |
|---|---|
| Range (internal sensor): | -19.9 to 49.9 °C |
| Accuracy: | ±0.4 °C |
| Resolution: | 0.1 °C/°F |
| Max/Min: | Yes |
| Alarm: | Programmable high/low, 82.1 dB |
| Probe Lead: | 2 metre PVC |
| Battery: | 2 x 1.5 volt AA |
| Battery Life: | 25,000 hours |
| IP Rating: | IP54 |
| Dimensions: | 96 x 73 x 29mm |
| Weight: | 214 grams |
| Case Material: | ABS plastic |
| Guarantee: | two years |
| Measurement Scale: | Celsius/Fahrenheit |
| Conforms To: | EN 13485 |
Downloads
ThermaGuard® 101 Instructions (PDF, 315 KB)










